Water Adventures
Surfboard Fins at the Repair Counter: Which Piece Is Missing?
A customer arrives with two fins in a bag and a board back at the beach. Before opening a new pack, find out which position is empty and what fits the board.
A customer arrives with two fins in a bag and a board back at the beach. Before opening a new pack, find out which position is empty and what fits the board.
The first question at a repair counter should be easy to answer: “Can you show me the underside of the board?” A photo of a loose fin shows its outline. A view of the whole board shows where the gap is. Ask the customer to include the remaining fins, then photograph the base of a removed matching fin if one is already available. Keep the board make and model alongside the photographs.
Count positions before opening a packet
DYLAN’s catalogue has a Twin Fin Pair (067), a Keel Fin Pair (071) and a Thruster Set / M7 (072). A quantity of one on a purchase order can therefore represent different numbers of pieces. Write the model and the sales unit together. Keep the supplier’s set intact while deciding whether there is a genuine single-fin service line.
| What arrives at the counter | What the buyer needs to establish |
|---|---|
| One surviving fin from a pair | Which side is missing? Ask whether the supplier sells that side separately and whether the surviving fin matches the current version. |
| Two fins from a three-fin set | Mark each occupied position on a sketch. Request the reference for the missing position and a photograph of its base. |
| A board with no fins | Record the number and type of boxes. Obtain a written compatibility answer for the proposed complete set. |
Turn the sample into a counter reference
Photograph the part the packaging hides
Take a square-on image of the sample base next to a scale. Add the pack label and the supplier’s part reference to the same record. Separate a visible tab or slot from a confirmed system name. Two silhouettes can look alike while the parts seat differently.
Decide who bears the cost of a broken set
If a retailer splits a three-piece pack to sell one piece, the other two need an identifiable position and a realistic route back to sale. Ask for separate prices for the complete pack and the service part. If only complete packs can be supplied, quote the full pack and show the customer exactly what they will receive.
Can I list M7 as compatible with a particular brand?
The DYLAN card gives a model designation and source reference F00424. It does not establish brand interchangeability. Keep the compatibility field open until the supplier identifies the box system and the sample has been checked against the intended board.
DYLAN Water Sports 072 — Thruster Set / M7 · DYLAN Water Sports 067 — Twin Fin Pair · DYLAN Water Sports 071 — Keel Fin Pair




