Back to Blog

Skiing

Ski Poles for a Rental Desk: When Can a Single Pole Rejoin a Pair?

A rack can contain plenty of poles and still be short of usable pairs. Count the odd singles at closing time before writing the next purchase order.

DYLAN Ski Poles — product branding visualization

A rack can contain plenty of poles and still be short of usable pairs. Count the odd singles at closing time before writing the next purchase order.

Ski Poles — full catalogue viewDYLAN
DYLAN Skiing 002 appears in the ski collection as a pair. Confirm the commercial order unit and available lengths separately. Catalogue image

Suppose a hire shop finishes the day with seven poles labelled with the same length. Counting by twos suggests three pairs and one spare. At the bench, four belong to one model and three to another. The result depends on which pieces can actually be matched. A total by length alone gives the buyer too little information to order replacements.

Give every loose pole a destination

At closing time, lay out returned poles by marked length, then group them by model and revision. Keep a separate tray for worn, damaged or unidentified pieces awaiting staff inspection. The buyer needs a count of usable pairs, identifiable singles and unresolved stock. Combining the three hides the sizes that will run short on a busy morning.

What staff findBuying decision
Two sound poles with matching model and lengthReturn them to the pair count after the shop’s normal inspection. No replacement order is needed for that pair.
One identifiable sound poleRecord its model, length and identifying details. Ask whether one matching pole can be ordered and how the supplier labels the unit.
Two equal-length poles with different grips or markingsKeep them as separate records until staff can establish an approved match. Use a labelled sample when discussing alternatives.
Catalogue close-up of the grip ends. Use the physical sample to check labels and distinguish revisions that look similar on the rack.DYLAN
Catalogue close-up of the grip ends. Use the physical sample to check labels and distinguish revisions that look similar on the rack. Catalogue image

Quote the shortage in pairs customers can actually hire

Work one length at a time

Take a desk that needs eight ready pairs in one marked length and holds six complete pairs plus two sound singles of different models. If one exact replacement for each single can be purchased, two new poles close the gap. If replacements are sold only as pairs and the singles cannot be matched, two complete new pairs close it. Those purchase orders contain different quantities even though they serve the same number of customers.

Make the reference useful on the next shift

Attach photographs of the whole sample, the length marking, the grip and the basket to the stock record. Ask the supplier how a revised grip, strap or basket would be identified on a future packing list. A purchase line for “one Skiing 002” should spell out whether one piece or one pair will arrive.

Does the DYLAN photograph confirm singles are available?

No. The catalogue gives the reference DYLAN Skiing 002 and the product name Ski Poles. Ask for the supported lengths, replacement policy and order unit before treating odd poles as recoverable stock. If a match cannot be confirmed, base the order on the number of complete pairs the desk still needs.

DYLAN Skiing 002 — Ski Poles

Ask DYLAN about DYLAN Skiing 002 ↗

Get a quote →