Water Adventures
Wholesale Boats for Dealers: Can One Kong 330 Replace Another?
Comparing wholesale boats for a dealer order? Two DYLAN Kong 330 models share overall dimensions but differ in weight, interior length and listed load.
Buying wholesale boats for a dealership? Two DYLAN inflatables measure 330 × 150 cm, yet one weighs 15 kg more. Here is how to handle a proposed swap.
A customer reserves a black inflatable fishing boat. The purchasing desk considers offering a yellow one with the same overall dimensions. Can the sales team change the colour on the reservation and leave the rest alone? Put the two DYLAN catalogue cards side by side and three differences appear before you get to the price. They affect what the customer can stow, what the shop has to move and what the salesperson can promise.
Comparing wholesale boats that share a model number
Start with the full names. The Black Kong 330, DYLAN Boating 001, and the Yellow Kong 330, DYLAN Boating 006, share the number 330. Each catalogue entry lists an aluminium-alloy floor. The following figures come from the two entries linked above. Use them to decide which sample to request and have the supplier confirm the specification of the unit being quoted.
| Catalogue measure | Black · 001 | Yellow · 006 |
|---|---|---|
| Overall dimensions | 330 × 150 cm | 330 × 150 cm |
| Interior dimensions | 212 × 66 cm | 218 × 66 cm |
| Net weight | 66 kg | 51 kg |
| Listed load | 600 kg | 540 kg |
For a substitution decision, read across each row before comparing down the columns. Overall dimensions describe the exterior footprint; the interior dimensions, net weight and listed load are separate catalogue measures. Keep those labels with their figures in the purchasing record so that a shared length or colour change does not obscure another difference between 001 and 006.
The yellow model offers six more centimetres of listed interior length, with the same listed width. The black model has a listed load figure 60 kg higher. Those differences run in opposite directions. A retailer choosing one demonstration boat should decide which question buyers most often bring to the counter. A six-centimetre gain may matter to someone carrying a long case. Another customer may have chosen the black boat on the strength of its stated load figure. A substitution changes the conversation with each customer.
Take the customer’s kit to the sample
Mark the space the kit actually occupies
A fishing tackle case can be shorter than the published interior and still be awkward to use. Take the case your store intends to sell alongside the boat. Record its outside measurements with the handle folded. At the sample, place it where the buyer expects it to go, open the lid and check whether the person demonstrating it can reach the contents. Note the position of the seat in the sample photo. The catalogue gives a length and a width, but it does not draw a rectangular storage bay of those dimensions.
Keep a short record someone else can repeat. “Case A opens with the seat in the position pictured” is a more useful sales note than “fits fishing gear”. If the Yellow Kong was the only sample available, put 006 on the note. Leave the corresponding field for 001 open until someone checks that model. A shop can reuse the same case and camera angle to make the second check quick.
Follow the boat through the rental depot
For a hire fleet, take the sample through an ordinary changeover with the people who do the work. Where does the delivery carton stop? Where do staff assemble the boat? Which trolley and storage position do they use? Record the actual configuration being moved at each stage. A catalogue net weight cannot tell the depot manager what a trolley will carry once the team adds its own equipment. Have the manager assess the route and handling arrangements before choosing a fleet model.
Give the salesperson a substitution rule they can use
On a mixed order, give each model its own purchase order line and its own stock code. A practical instruction for the supplier is “Quote the requested model. Show any alternative on a separate line and identify every specification that changes.” That lets a salesperson price an alternative without silently changing a customer’s reservation. Use the same wording on repeat orders, especially when the person placing the reorder did not approve the original sample.
- Colour promised on a reservation. Keep the customer’s chosen reference against the deposit or enquiry. Obtain their agreement before changing the reference, even when the exterior footprint fits the same display.
- Accessories sold as a kit. List each accessory by reference and record which boat was used for the fit check. Request any differences in included equipment in writing before the shop prints its bundle label.
- Existing outboard requested. Give the supplier the exact engine designation and request written compatibility information for the specific hull. The catalogue load figure does not establish a motor rating. Leave the motor off the package offer while the pairing is unresolved.
Carry the decision onto the shelf label
Keep a separate product record even if both boats sit on one display. Put the model name, catalogue reference and the measurements used in your comparison on the staff copy. For a US dealer adding customary units, keep the original metric figures alongside any rounded conversions. For a German-language listing, have the reviewer check that the translated labels still distinguish net weight from listed load. A translated number in the wrong field can reach every branch that shares the same product feed.
Questions to settle before placing the order
Can we approve both models from one demonstration unit?
Use one unit to decide whether the range merits further review. If a sale depends on a particular case fitting, a particular handling arrangement or a quoted accessory, record which checks remain open for the other unit. Order the second sample when closing one of those gaps is a condition of buying.
What should go in our enquiry?
Specify 001, 006 or both, the quantities for each, the destination and whether the order is for resale or fleet use. Add the one decision still holding up the order. For example, ask for a dimensioned view of the space beneath the proposed seat position, or a quotation identifying the exact motor and hull combination. A buyer can then approve that answer against a named model and keep it with the order for the next purchasing cycle.
Explore the DYLAN inflatable boat range for dealers
Request a model-specific quotation ↗


