Back to Blog

Trail Adventures

How Tall Are These Gaiters? Give Shoppers a Measurement They Can Use

A product called “ankle” can look much taller in a photograph. Use one repeatable measurement and a labelled try-on photo before printing the shelf card.

A product called “ankle” can look much taller in a photograph. Use one repeatable measurement and a labelled try-on photo before printing the shelf card.

High Trail Gaiter in black shown worn over footwear in the catalogue.DYLAN
High Trail Gaiter in black shown worn over footwear in the catalogue. · Catalogue source

A shopper wants gaiters that finish below a trouser pocket. The sales assistant shows two catalogue pictures. The boots, trousers and people in the pictures differ, so the customer still cannot tell where either gaiter would end. A buying team can answer that question before the first shelf label goes to print.

Measure the garment and photograph the fit separately

Use DYLAN Hiking 043 High Trail Gaiter and 045 Ankle Trail Gaiter as the comparison. Start with a sample of each in an identified size. Lay it flat and choose one repeatable line, such as the centre back from the lower fabric edge to the upper fabric edge. Exclude any strap that runs under the boot. If the cut makes that method ambiguous, sketch the endpoints and share the sketch with the supplier.

Shelf-card fieldHow to substantiate it
Garment height in cmRecord the sample size, endpoints and measurement with the fabric relaxed. Keep a ruler photo with the buying record.
Coverage when wornPhotograph both styles on the same wearer, boot and trouser setup where available. Label all three and show the upper edge.
Size variationAsk whether the height changes across sizes. List verified size-specific values or identify the single size measured.
Lower edge of the High Trail sample as pictured over footwear. Choose and mark a consistent lower measuring point on the physical sample.DYLAN
Lower edge of the High Trail sample as pictured over footwear. Choose and mark a consistent lower measuring point on the physical sample. · Catalogue source

Give sales staff a useful answer when two photos look alike

Use the measured garment length for comparison. Use the try-on photograph to explain where the upper edge sat on that particular wearer. A higher boot collar or a different lower-edge position can change the apparent coverage. Keep these two observations in separate fields so the online product team can translate the copy without losing the reference point.

Should the buyer rename the “Ankle” model?

Keep the supplier’s catalogue name and reference on the quotation. If an incoming sample looks taller than the name suggests, compare its carton label with the ordered reference and ask for clarification before approving retail copy. The two current catalogue images provide no scale for converting their visible heights into centimetres. A size-labelled sample or dimensioned supplier drawing would close that gap.

The catalogue’s Ankle Trail Gaiter shown on a wearer. This is a separate catalogue photograph, with no shared scale.DYLAN
The catalogue’s Ankle Trail Gaiter shown on a wearer. This is a separate catalogue photograph, with no shared scale. · Catalogue source

DYLAN Hiking 043 — High Trail Gaiter · Black · DYLAN Hiking 045 — Ankle Trail Gaiter · Black

Ask about DYLAN Hiking 043 →

Get a quote →