Helmeted climber on an outdoor rock face

DYLAN / PRACTICAL ROCK CLIMBING GUIDES

Prepare your body.
Check your safety.

Eight practical guides to warming up, checking equipment, moving with control and making clear safety decisions — before, during and after your climb.

08 PRACTICAL GUIDES03 WARM-UP STAGESDO · CHECK · STOP IF

A practical sequence.
One check at a time.

Work through the preparation first, complete the appropriate safety checks, then practise easy movement. Each guide tells you what to do, what to check and when to stop. Read the linked article for the full explanation.

Choose the right setting. These guides focus on beginner indoor climbing and supervised single-pitch sessions. Rope checks require trained partners or an instructor. Bouldering and auto-belay systems need their own venue induction. Written guidance does not replace practical instruction in belaying, knots, anchors, descent or rescue.
01—08 / PREPARE TO CLIMB
01

WARM-UP · ALL CLIMBERS

Start with a whole-body warm-up

Raise your temperature before asking your fingers and shoulders to work. Begin on clear, level ground away from landing zones.

  1. Walk briskly, march or jog gently for 3–5 minutes as an example starting point; keep the effort easy.
  2. Add controlled shallow squats and alternating heel raises. Move through a comfortable range, without bouncing.
  3. Finish feeling warmer and able to talk comfortably. Allow more gradual preparation in cold conditions.
CHECK BEFORE CONTINUINGWarm, comfortable and alert — not breathless or fatigued.
STOP & REASSESSStop for pain, dizziness or feeling unwell. Do not use a warm-up to push through an injury.
READ GUIDE 01 IN FULL ↗
02

MOVEMENT PREP · ALL CLIMBERS

Mobilise shoulders, wrists, hips & ankles

Use small, smooth movements to explore the range you will need on the wall. Keep both feet on stable ground for this stage.

  1. Circle your arms slowly, beginning small; roll your wrists gently in both directions.
  2. Use support to lift one knee comfortably and rotate the hip out and back. Repeat on the other side.
  3. Circle each ankle, then try a shallow squat. Keep the movement easy and within your normal range.
CHECK BEFORE CONTINUINGYou can reach, turn and bend without pain or forcing the joint.
STOP & REASSESSDo not bounce into end range or force a stiff joint. Reduce the range or stop if movement hurts.
READ GUIDE 02 IN FULL ↗
03

FINGERS & FOREARMS · ALL CLIMBERS

Prepare fingers with gradual loading

Moving your hands is only the start. Build climbing load gradually on easy terrain with generous holds and reliable footholds.

  1. Gently open and close your hands and move the wrists; avoid forceful finger stretching.
  2. After the safety checks, begin with very easy climbing using large holds and plenty of foot support.
  3. Rest, assess how your fingers feel, then increase difficulty a little at a time. Keep hard attempts for later.
CHECK BEFORE CONTINUINGGrip feels comfortable; movement stays smooth without straining.
STOP & REASSESSStop for sharp or localised finger pain, a sudden pop or swelling. Do not tape over symptoms and keep climbing.
READ GUIDE 03 IN FULL ↗
04

EQUIPMENT · ROPED CLIMBING

Inspect and fit your equipment

Lay out the equipment for the planned climbing style. Use the instructions for the exact model, not a photo of a different setup.

  1. Inspect harness webbing, stitching and attachment points; check the rope, connectors, device and helmet as instructed.
  2. Fit the harness snugly with its waistbelt above the hips. Check buckles using that model’s instructions.
  3. Confirm rope/device compatibility and suitable rope length with a competent instructor or partner.
CHECK BEFORE CONTINUINGEvery item is identified, inspected, compatible and properly fitted.
STOP & REASSESSSet aside damaged, questionable or unfamiliar equipment. Do not repair life-support gear with tape or guess how it works.
READ GUIDE 04 IN FULL ↗
05

BEFORE EVERY CLIMB · ROPED CLIMBING

Perform a mutual partner check

Pause together before leaving the ground. Both climber and belayer check the system; familiarity is not a reason to skip it.

  1. Harnesses: snug above the hips; buckles correctly arranged for the model.
  2. Tie-in: correct harness attachment points and a completed, dressed and tightened knot, checked by a trained partner.
  3. Belay setup: correct threading and attachment, locked connector and taught function check; verify rope-end knot and sufficient length.
CHECK BEFORE CONTINUINGBoth people have checked and clearly confirmed readiness.
STOP & REASSESSAny uncertainty, interruption or changed setup means pause and recheck. An untrained partner cannot verify a system they do not understand.
READ GUIDE 05 IN FULL ↗
06

EASY TERRAIN · MOVEMENT PRACTICE

Practise feet, balance & relaxed movement

Use a very easy supervised climb with large holds. Practise movement quality while the difficulty leaves you room to think.

  1. Quiet feet: look at the foothold and place your shoe deliberately before moving your eyes away.
  2. Shift weight over the supporting foot, then push through the leg instead of pulling every move with your arms.
  3. Pause in a balanced position, relax unnecessary grip and breathe. Stop the drill before form breaks down.
CHECK BEFORE CONTINUINGYour feet stay placed and each move feels controlled.
STOP & REASSESSDo not practise on exposed unroped terrain. Stop if you are too tired to place your feet accurately or if a move causes pain.
READ GUIDE 06 IN FULL ↗
07

COMMUNICATION · ROPES & BOULDERING

Agree calls & protect the climbing area

Before climbing, agree how you will communicate and who is responsible for protection. Keep attention on the climber throughout.

  1. Rehearse clear calls for starting, taking tension, stopping and lowering; use names at busy venues.
  2. A trained belayer keeps control of the brake-side rope and follows the exact device technique, including with assisted braking.
  3. Keep landing and belay areas clear of people and loose equipment. Do not walk underneath another climber.
CHECK BEFORE CONTINUINGBoth partners understand the signals and can hear or use an agreed alternative.
STOP & REASSESSIf a call is unclear, maintain protection and clarify. Never remove someone from belay because you assume they have finished.
READ GUIDE 07 IN FULL ↗
08

FINISH & EMERGENCY · BEFORE YOU CLIMB

Plan the descent & know when to stop

Getting down is part of the route. Agree the finish, retreat option and emergency information before anyone starts upward.

  1. Confirm how the climb ends and who manages the descent. Check rope length against the actual lowering distance.
  2. Set a turnaround point for time, worsening weather or fatigue; stop when safe progress or communication is doubtful.
  3. Save the location, route name, local emergency contact and access details offline. Share the plan with someone staying behind.
CHECK BEFORE CONTINUINGYou can explain the finish and the backup plan before starting.
STOP & REASSESSDo not improvise anchor changes, rethreading or abseiling from written notes. If stuck or injured, maintain protection and seek qualified help.
READ GUIDE 08 IN FULL ↗

YOUR FINAL PAUSE

Ready means checked.

Use this reminder with your instructor or trained partner. Ticking a box is not a competence assessment.

Get a quote →